Wholesale · Private label · OEM · ODM
AB0128 Slow Duo Pen — Pen massager, IP7
Model AB0128 · Pen-form teaser, swappable heads
Request a Quote for AB0128 Request AB0128 samples
MOQ 300 units · mixed SKUs
Impulse, travel and gifting retail — a 23 mm pen-slim body with swappable heads on the same ten modes as the rest of the range.
Pen
10 (3 speeds + 7 patterns)
IP7 — submersible
Full range comparison: AB0128 against all 25 models →
AB0128 specifications
Every figure below is the figure we publish on the range page and in our quote — measured or confirmed at sampling, not estimated. A field still pending verification is marked as such rather than filled in.
| Type | Pen-form teaser massager with swappable heads |
|---|---|
| Functions | 10 vibration modes; swappable teasing heads at both ends |
| Motors | 1 × independent |
| Vibration modes | 10 (3 speeds + 7 patterns) |
| Dimensions | 185 × 23 mm |
| Weight | 40 g |
| Battery | Rechargeable Li-ion, USB charging |
| Runtime | Approx. 60 minutes |
| Noise | <60 dB |
| Material | ABS + eco-grade silicone |
| Waterproof | IP7 — submersible |
| App | Not required |
| Colours | Terracotta; custom colour available at volume |
| Certifications | CE (LVD + EMC + RoHS) · RoHS · IP7 |
AB0128 against the rest of the range
A specification row on its own says what a number is, not whether it is good. This is the same three numbers drawn against all 25 models, so a buyer can see where AB0128 actually sits before asking for a sample — and so the answer to "how quiet is it" is a comparison rather than an adjective.
Where AB0128 fits
Impulse, travel and gifting retail — a 23 mm pen-slim body with swappable heads on the same ten modes as the rest of the range. The range opens at a 300-unit MOQ that mixes all 25 models in one order. Three things procurement asks about this model specifically:
What it does
A pen-slim teaser at 23 mm across and 185 mm long, with swappable heads at both ends. Ten modes on the same control platform as the rest of the range — no app, no pairing, one button. The heads are the product: a buyer lists it as an ordinary pen leaves the reason to pick it up on the table.
Where it sits
Impulse, travel and gifting retail. At 185 mm it reads as a pen on the shelf rather than a device in a box, which is the merchandising argument in this category and what decides an end-of-aisle or counter-top placement rather than a locked cabinet.
What to know before quoting
IP7, so it is submersible, and 40 g — our lightest model. It is ABS with eco-grade silicone, not the medical-grade silicone used on the five dual-zone bodies, so ask for its own material declaration rather than folding it into the range-wide one.
Commercial terms for AB0128
These are the range terms and they apply to AB0128 without variation. We do not publish a per-model minimum, because the factory does not impose one — all 25 models can be mixed in a single order to reach the 300-unit MOQ minimum.
| Minimum order quantity | 300 units, mixed SKUs welcome |
|---|---|
| Reorder minimum | 200 units |
| Sample turnaround | 3–5 business days |
| Production lead time | 25–35 days under 100% final inspection |
| OEM/ODM lead time | 15–25 days |
| New mould | 45–60 days |
| Warranty | 12 months from the shipment date, with a written resolution plan within 48 hours |
| Quality standard | AQL 2.5 inspection, <0.1% defect rate |
| Payment | 30% deposit with the balance before shipment, and net-30 terms after your third completed order |
Every quote ships with the full compliance file: CE DoC, RoHS, FDA material safety, MSDS and the batch noise test record for the units you receive. Request a quote for AB0128 →
What ships with every unit
AB0128 is produced on the same line, to the same standard, as the rest of the range. Production runs through our manufacturing partner in Dongguan, Guangdong, China, founded 2014, with 20+ dedicated QC staff and 30–45 days of critical component safety stock held.
Certifications
- CE — LVD (2014/35/EU), EMC (2014/30/EU)
- RoHS — 10 substances incl. 4 phthalates (SGS / Bureau Veritas)
- FDA material safety — silicone per 21 CFR 177.2600
- IPX5 — tested per IEC 60529 (12.5 L/min, 1 m, 3 min)
- UKCA — prepared on request for the UK market
Noise, measured not asserted
≤60 dB at 30 cm — dual-motor models 55–60 dB, single-motor 45–55 dB, and the telescoping, wearable, suction and pen units each under 60 dB
The test record travels with the shipment, so your importer and your quality team receive the measurement for the batch they are actually clearing — not a catalogue figure. See how AB0128 is measured for noise and inspected.
Related models
The four closest bodies in the range are picked on the same motor configuration, the same water-ingress tier and a length within a few centimetres — the three things that decide whether a model substitutes for AB0128 on a shelf. The two nearest are AB0199, the pulse unit, 10 mm longer and AB0212A, the signal unit, 22 mm longer. All 25 can be mixed in one order to reach the 300-unit MOQ minimum.
The entries either side of AB0128 in the catalogue are AB0178 Halo and Sway 160 × 30 mm, 137 mm longer — the shortest route to the neighbouring body if this one is the wrong shape. All three take the same minimum and can travel in one order.
The other 20 models, and every specification side by side: compare AB0128 with all 25 models →
Before you order AB0128
The pages a buyer goes to next from a model page: what can be branded, what the terms are, what the range is tested against, and the specifications in one table.
CommercialPut your brand on AB0128Logo, Pantone colour, packaging and manual — and from what quantity.
CommercialWholesale terms and volume tiersAB0128 mixes with all 25 models to reach the 300-unit minimum.
EvidenceHow AB0128 is tested<60 dB measured at 30 cm, AQL 2.5 inspection before shipment.
CommercialWhat buyers ask before ordering AB0128Samples, compliance, packaging and shipping.
LibraryAB0128 specification sheetOne row per model, linked to the page that carries the full specification table and the Product node behind it.
GuideWhat AB0128's IP rating coversThe numbers look like a ladder. They are not — each is its own test, and the difference matters for both marketing copy and warranty.
If AB0128 is not the shape you need, the two pages that decide whether it is the right buy are where the range, the terms and the factory are set out, the four quality gates an order passes through, silicone compliance for the EU and US and the bench, the distance and the meter.
Where AB0128 sits on this site
A model page answers "what is this device". The four sections below answer the questions that come immediately after — what the terms are, how the specification was produced, what the standard says, and which guide explains the trade-off you are weighing.