Wholesale · Private label · OEM · ODM
AB0296 Slow Duo Extend — Telescoping massager, 355 mm extended
Model AB0296 · Telescoping oral unit, 355 mm extended
Request a Quote for AB0296 Request AB0296 samples
MOQ 300 units · mixed SKUs
Oral-category listings, and any brief that asks for reach rather than zones — 355 mm of it, on the same ten levels.
Telescoping
10 levels
IPX5 — rinse-safe, not submersible
Full range comparison: AB0296 against all 25 models →
AB0296 specifications
Every figure below is the figure we publish on the range page and in our quote — measured or confirmed at sampling, not estimated. A field still pending verification is marked as such rather than filled in.
| Type | Telescoping vibrator with mouth-grip head |
|---|---|
| Functions | Vibration + telescoping extension + oral grip |
| Motors | 1 × independent |
| Vibration modes | 10 levels |
| Dimensions | 355 × 66 × 32 mm extended |
| Weight | 223 g |
| Battery | Rechargeable Li-ion, USB charging |
| Runtime | Approx. 50 minutes |
| Noise | <60 dB |
| Material | ABS + eco-grade silicone |
| Waterproof | IPX5 — rinse-safe, not submersible |
| App | Not required |
| Colours | Rose red, purple; custom colour available at volume |
| Certifications | CE (LVD + EMC + RoHS) · RoHS · IPX5 |
AB0296 against the rest of the range
A specification row on its own says what a number is, not whether it is good. This is the same three numbers drawn against all 25 models, so a buyer can see where AB0296 actually sits before asking for a sample — and so the answer to "how quiet is it" is a comparison rather than an adjective.
Where AB0296 fits
Oral-category listings, and any brief that asks for reach rather than zones — 355 mm of it, on the same ten levels. The range opens at a 300-unit MOQ that mixes all 25 models in one order. Three things procurement asks about this model specifically:
What it does
A shaft that extends to 355 mm and a head shaped to stay put, driven on the same ten levels as the rest of the range. Vibration, extension and grip from one control — no second unit, no pairing step.
Where it sits
Oral-category listings, and any range that needs a telescoping unit beside its dual-zone bodies. It extends; it does not stimulate in zones. Merchandise it on reach and adjustability, not alongside a couples vibrator.
What to know before quoting
This is ABS with eco-grade silicone, not the medical-grade silicone used on the five dual-zone bodies. Ask us for its own material declaration rather than folding it into the range-wide one.
Commercial terms for AB0296
These are the range terms and they apply to AB0296 without variation. We do not publish a per-model minimum, because the factory does not impose one — all 25 models can be mixed in a single order to reach the 300-unit MOQ minimum.
| Minimum order quantity | 300 units, mixed SKUs welcome |
|---|---|
| Reorder minimum | 200 units |
| Sample turnaround | 3–5 business days |
| Production lead time | 25–35 days under 100% final inspection |
| OEM/ODM lead time | 15–25 days |
| New mould | 45–60 days |
| Warranty | 12 months from the shipment date, with a written resolution plan within 48 hours |
| Quality standard | AQL 2.5 inspection, <0.1% defect rate |
| Payment | 30% deposit with the balance before shipment, and net-30 terms after your third completed order |
Every quote ships with the full compliance file: CE DoC, RoHS, FDA material safety, MSDS and the batch noise test record for the units you receive. Request a quote for AB0296 →
What ships with every unit
AB0296 is produced on the same line, to the same standard, as the rest of the range. Production runs through our manufacturing partner in Dongguan, Guangdong, China, founded 2014, with 20+ dedicated QC staff and 30–45 days of critical component safety stock held.
Certifications
- CE — LVD (2014/35/EU), EMC (2014/30/EU)
- RoHS — 10 substances incl. 4 phthalates (SGS / Bureau Veritas)
- FDA material safety — silicone per 21 CFR 177.2600
- IPX5 — tested per IEC 60529 (12.5 L/min, 1 m, 3 min)
- UKCA — prepared on request for the UK market
Noise, measured not asserted
≤60 dB at 30 cm — dual-motor models 55–60 dB, single-motor 45–55 dB, and the telescoping, wearable, suction and pen units each under 60 dB
The test record travels with the shipment, so your importer and your quality team receive the measurement for the batch they are actually clearing — not a catalogue figure. See how AB0296 is measured for noise and inspected.
Related models
The four closest bodies in the range are picked on the same motor configuration, the same water-ingress tier and a length within a few centimetres — the three things that decide whether a model substitutes for AB0296 on a shelf. The two nearest are Swap 238 × 35 mm, 117 mm shorter and Reach by Slow Duo, 117 mm shorter. All 25 can be mixed in one order to reach the 300-unit MOQ minimum.
The entries either side of AB0296 in the catalogue are Slim 31 × 28 × 151 mm, 204 mm shorter and Signal 118 × 35.5 × 45 mm, 310 mm shorter — the shortest route to the neighbouring body if this one is the wrong shape. All three take the same minimum and can travel in one order.
The other 20 models, and every specification side by side: compare AB0296 with all 25 models →
Before you order AB0296
The pages a buyer goes to next from a model page: what can be branded, what the terms are, what the range is tested against, and the specifications in one table.
CommercialPut your brand on AB0296Logo, Pantone colour, packaging and manual — and from what quantity.
CommercialWholesale terms and volume tiersAB0296 mixes with all 25 models to reach the 300-unit minimum.
EvidenceHow AB0296 is tested<60 dB measured at 30 cm, AQL 2.5 inspection before shipment.
CommercialWhat buyers ask before ordering AB0296Samples, compliance, packaging and shipping.
LibraryAB0296 specification sheetOne row per model, linked to the page that carries the full specification table and the Product node behind it.
GuideHow AB0296's silicone is specifiedMost suppliers say "high-grade silicone". Almost none can tell you what that means. Here is what to specify, and what to ask to find out.
If AB0296 is not the shape you need, the two pages that decide whether it is the right buy are where the range, the terms and the factory are set out, the test methods behind the specification, the material standard your buyer will name first and the bench, the distance and the meter.
Where AB0296 sits on this site
A model page answers "what is this device". The four sections below answer the questions that come immediately after — what the terms are, how the specification was produced, what the standard says, and which guide explains the trade-off you are weighing.