Wholesale · Private label · OEM · ODM
Slow Duo Bloom
Couples and wearable retail — a 119 mm dual-head wearable that pops open for wear, on the same ten modes as the rest of the range and the lighter of the two wearables.
Model AB0136 · Dual-head wearable vibrator, 119 mm
MOQ 300 units · mixed SKUs
Dual-head
10 (3 speeds + 7 patterns)
IP7 — submersible
Request a Quote for AB0136 Request a Sample
Full range comparison: all 12 models side by side →
AB0136 specifications
Every figure below is the figure we publish on the range page and in our quote — measured or confirmed at sampling, not estimated. A field still pending verification is marked as such rather than filled in.
| Type | Dual-head wearable vibrator with wireless remote |
|---|---|
| Functions | 10 vibration modes; two bendable heads with an auto pop-open design; wireless remote control |
| Control | Wireless remote |
| Motors | Dual-head, bendable arms |
| Vibration modes | 10 (3 speeds + 7 patterns) |
| Dimensions | 119 × 31 mm |
| Weight | 78 g |
| Battery | Rechargeable Li-ion, USB charging |
| Runtime | Approx. 60 minutes |
| Noise | <60 dB |
| Material | ABS + eco-grade silicone |
| Waterproof | IP7 — submersible |
| App | Not required |
| Colours | Terracotta; custom colour available at volume |
| Certifications | CE (LVD + EMC + RoHS) · RoHS · IP7 |
Where AB0136 fits
Couples and wearable retail — a 119 mm dual-head wearable that pops open for wear, on the same ten modes as the rest of the range and the lighter of the two wearables. Three things procurement asks about this model specifically:
What it does
A dual-head wearable — two bendable arms that pop open for wear — with a retrieval cord and a wireless remote, on the same ten modes (3 speeds + 7 patterns) as the rest of the range. The form is the product: a buyer lists it as an ordinary bullet leaves the reason to pick it up on the table.
Where it sits
Couples and wearable retail, and any assortment that already carries a flat dual-zone wearable but not an insertable one. At 78 g and 119 mm it is the lighter of the two wearables and the only one that opens for wear, so merchandise it beside the AB0212A rather than as a substitute for it.
What to know before quoting
IP7, so it is submersible — one of four submersible units in the range, not a rinse-safe model. It is ABS with eco-grade silicone, not the medical-grade silicone used on the five dual-zone bodies, so ask for its own material declaration rather than folding it into the range-wide one.
Commercial terms for AB0136
These are the range terms and they apply to AB0136 without variation. We do not publish a per-model minimum, because the factory does not impose one — all 12 models can be mixed in a single order to reach the 300-unit minimum.
| Minimum order quantity | 300 units, mixed SKUs welcome |
|---|---|
| Reorder minimum | 200 units |
| Sample turnaround | 3–5 business days |
| Production lead time | 25–35 days under 100% final inspection |
| OEM/ODM lead time | 15–25 days |
| New mould | 45–60 days |
| Warranty | 12 months from the shipment date, with a written resolution plan within 48 hours |
| Quality standard | AQL 2.5 inspection, <0.1% defect rate |
| Payment | 30% deposit with the balance before shipment, and net-30 terms after your third completed order |
Every quote ships with the full compliance file: CE DoC, RoHS, FDA material safety, MSDS and the batch noise test record for the units you receive. Request a quote for AB0136 →
What ships with every unit
AB0136 is produced on the same line, to the same standard, as the rest of the range. Production runs through our manufacturing partner in Dongguan, Guangdong, China, founded 2014, with 20+ dedicated QC staff and 30–45 days of critical component safety stock held.
Certifications
- CE — LVD (2014/35/EU), EMC (2014/30/EU)
- RoHS — 10 substances incl. 4 phthalates (SGS / Bureau Veritas)
- FDA material safety — silicone per 21 CFR 177.2600
- IPX5 — tested per IEC 60529 (12.5 L/min, 1 m, 3 min)
- UKCA — prepared on request for the UK market
Noise, measured not asserted
≤60 dB at 30 cm — dual-motor models 55–60 dB, single-motor 45–55 dB, and the telescoping, wearable, suction and pen units each under 60 dB
The test record travels with the shipment, so your importer and your quality team receive the measurement for the batch they are actually clearing — not a catalogue figure. See the noise engineering.
The rest of the range
11 other models on the same control platform and the same build standard. All 12 can be mixed in one order to reach the 300-unit minimum.
