Wholesale · Private label · OEM · ODM
Slow Duo Signal
Couples and long-distance retail, and any brief where the person controlling it should not be the person wearing it.
Model AB0212A · Remote-controlled wearable, 10 m reach
MOQ 300 units · mixed SKUs
Wearable
10 vibration patterns (3 speeds + 7 patterns)
IPX5 — rinse-safe, not submersible
Request a Quote for AB0212A Request a Sample
Full range comparison: all 7 models side by side →
AB0212A specifications
Every figure below is the figure we publish on the range page and in our quote — measured or confirmed at sampling, not estimated. A field still pending verification is marked as such rather than filled in.
| Type | Wearable vibrator with wireless remote |
|---|---|
| Functions | Dual-zone vibration, 10 levels |
| Motors | 2 × independent |
| Vibration modes | 10 levels |
| Dimensions | 118 × 35.5 × 45 mm |
| Weight | 103 g |
| Battery | Rechargeable Li-ion, USB charging |
| Runtime | Approx. 60 minutes |
| Noise | <60 dB |
| Material | ABS + eco-grade silicone |
| Waterproof | IP7 — submersible |
| App | Not required |
| Colours | Pink, purple; custom colour available at volume |
| Certifications | CE (LVD + EMC + RoHS) · RoHS · IP7 |
Where AB0212A fits
Couples and long-distance retail, and any brief where the person controlling it should not be the person wearing it. Three things procurement asks about this model specifically:
What it does
A wearable with a wireless remote that reaches past ten metres. Ten levels across two zones, and nothing to hold, nothing to pair, nothing to set up before.
Where it sits
Couples and long-distance retail, and any brief where the person holding the control should not be the person wearing it. The remote is the product here — a buyer listing it as an ordinary wearable leaves the reason to buy it on the table.
What to know before quoting
This one is IP7, so it is submersible — the rest of the range is IP5 and rinse-safe only. That is a genuine step up and it belongs on the listing, but keep the two claims apart: do not write IP5 for this SKU or IP7 for the others.
Commercial terms for AB0212A
These are the range terms and they apply to AB0212A without variation. We do not publish a per-model minimum, because the factory does not impose one — all 7 models can be mixed in a single order to reach the 300-unit minimum.
| Minimum order quantity | 300 units, mixed SKUs welcome |
|---|---|
| Reorder minimum | 200 units |
| Sample turnaround | 3–5 business days |
| Production lead time | 25–35 days under 100% final inspection |
| OEM/ODM lead time | 15–25 days |
| New mould | 45–60 days |
| Warranty | 12 months from the shipment date, with a written resolution plan within 48 hours |
| Quality standard | AQL 2.5 inspection, <0.1% defect rate |
| Payment | 30% deposit with the balance before shipment, and net-30 terms after your third completed order |
Every quote ships with the full compliance file: CE DoC, RoHS, FDA material safety, MSDS and the batch noise test record for the units you receive. Request a quote for AB0212A →
What ships with every unit
AB0212A is produced on the same line, to the same standard, as the rest of the range. Production runs through our manufacturing partner in Dongguan, Guangdong, China, founded 2014, with 20+ dedicated QC staff and 30–45 days of critical component safety stock held.
Certifications
- CE — LVD (2014/35/EU), EMC (2014/30/EU)
- RoHS — 10 substances incl. 4 phthalates (SGS / Bureau Veritas)
- FDA material safety — silicone per 21 CFR 177.2600
- IPX5 — tested per IEC 60529 (12.5 L/min, 1 m, 3 min)
- UKCA — prepared on request for the UK market
Noise, measured not asserted
≤60 dB at 30 cm — dual-motor models 55–60 dB, single-motor 45–55 dB, telescoping under 60 dB, wearable under 60 dB
The test record travels with the shipment, so your importer and your quality team receive the measurement for the batch they are actually clearing — not a catalogue figure. See the noise engineering.
The rest of the range
6 other models on the same control platform and the same build standard. All 7 can be mixed in one order to reach the 300-unit minimum.
