Wholesale · Private label · OEM · ODM
Slow Duo Resonance
Premium retail and subscription programmes — the widest speed range in the range, 150 to 9,500 RPM.
Model A0171 · High-resonance dual-motor, 137 mm
MOQ 300 units · mixed SKUs
Dual motor
10 vibration patterns (3 speeds + 7 patterns)
IPX5 water-resistant
Request a Quote for A0171 Request a Sample
Full range comparison: all five models side by side →
A0171 specifications
Every figure below is the figure we publish on the range page and in our quote — measured or confirmed at sampling, not estimated. A field still pending verification is marked as such rather than filled in.
| Motors | 2 × independent — 150–9,500 RPM shaft + 12,000 RPM contact point |
|---|---|
| Vibration modes | 10 (3 speeds + 7 patterns) |
| Dimensions | 30 × 36 × 137 mm |
| Weight | 135 g |
| Battery | 500 mAh Li-ion (13300) |
| Charging | USB 2.0 pin charging, approx. 1.5 h |
| Runtime | Approx. 40 minutes on high-speed mode |
| Noise | ≤60 dB at 30 cm |
| Material | Medical-grade, hypoallergenic silicone + food-grade ABS |
| Waterproof | IPX5 |
| App | Not required |
| Certifications | CE (LVD + EMC + RoHS) · RoHS · FDA · IPX5 |
Where A0171 fits
Premium retail and subscription programmes — the widest speed range in the range, 150 to 9,500 RPM. Three things procurement asks about this model specifically:
Speed range
A shaft motor running 150–9,500 RPM paired with a separate 12,000 RPM contact-point motor. The low end gives resolution where most devices offer only a jump between two coarse settings.
Which channel
Premium retail and subscription programmes. This is the model we recommend when the brief says quality of sensation rather than raw power.
Position on shelf
Premium tier. Our own recommendation for a first premium listing.
Commercial terms for A0171
These are the range terms and they apply to A0171 without variation. We do not publish a per-model minimum, because the factory does not impose one — all five models can be mixed in a single order to reach the 300-unit minimum.
| Minimum order quantity | 300 units, mixed SKUs welcome |
|---|---|
| Reorder minimum | 200 units |
| Sample turnaround | 3–5 business days |
| Production lead time | 25–35 days under 100% final inspection |
| OEM/ODM lead time | 15–25 days |
| New mould | 45–60 days |
| Warranty | 12 months from the shipment date, with a written resolution plan within 48 hours |
| Quality standard | AQL 2.5 inspection, <0.1% defect rate |
| Payment | 30% deposit with the balance before shipment, and net-30 terms after your third completed order |
Every quote ships with the full compliance file: CE DoC, RoHS, FDA material safety, MSDS and the batch noise test record for the units you receive. Request a quote for A0171 →
What ships with every unit
A0171 is produced on the same line, to the same standard, as the rest of the range. Production runs through our manufacturing partner in Dongguan, Guangdong, China, founded 2014, with 20+ dedicated QC staff and 30–45 days of critical component safety stock held.
Certifications
- CE — LVD (2014/35/EU), EMC (2014/30/EU)
- RoHS — 10 substances incl. 4 phthalates (SGS / Bureau Veritas)
- FDA material safety — silicone per 21 CFR 177.2600
- IPX5 — tested per IEC 60529 (12.5 L/min, 1 m, 3 min)
- UKCA — prepared on request for the UK market
Noise, measured not asserted
≤60 dB at 30 cm — dual-motor models 55–60 dB, single-motor 45–55 dB
The test record travels with the shipment, so your importer and your quality team receive the measurement for the batch they are actually clearing — not a catalogue figure. See the noise engineering.
The rest of the range
Four other models share this control platform, this material and this build standard. All five can be mixed in one order to reach the 300-unit minimum.
