Wholesale · Private label · OEM · ODM
Slow Duo Solo
Opening a new account at the lowest entry price point, without dropping to a different build standard.
Model A0183 · Single-motor, 135 mm
MOQ 300 units · mixed SKUs
Single motor
10 vibration patterns (3 speeds + 7 patterns)
IPX5 water-resistant
Request a Quote for A0183 Request a Sample
Full range comparison: all five models side by side →
A0183 specifications
Every figure below is the figure we publish on the range page and in our quote — measured or confirmed at sampling, not estimated. A field still pending verification is marked as such rather than filled in.
| Motors | 1 × independent |
|---|---|
| Vibration modes | 10 (3 speeds + 7 patterns) |
| Dimensions | 41 × 30 × 135 mm |
| Weight | 117 g |
| Battery | 500 mAh Li-ion (13300) |
| Charging | USB 2.0 pin charging, approx. 1.5 h |
| Runtime | Approx. 55 minutes on high-speed mode |
| Noise | ≤55 dB at 30 cm |
| Material | Medical-grade, hypoallergenic silicone + food-grade ABS |
| Waterproof | IPX5 |
| App | Not required |
| Certifications | CE (LVD + EMC + RoHS) · RoHS · FDA · IPX5 |
Where A0183 fits
Opening a new account at the lowest entry price point, without dropping to a different build standard. Three things procurement asks about this model specifically:
Entry price point
Single motor, 135 mm, 117 g. The lowest entry cost in the range without dropping to a different material or a different control platform.
Which channel
Opening a new account — the SKU we suggest for a first order, and the one to test a market before committing assortment depth.
Position on shelf
Entry tier, built to the same standard as the dual-motor models: same silicone, same 10 modes, same 12-month warranty.
Commercial terms for A0183
These are the range terms and they apply to A0183 without variation. We do not publish a per-model minimum, because the factory does not impose one — all five models can be mixed in a single order to reach the 300-unit minimum.
| Minimum order quantity | 300 units, mixed SKUs welcome |
|---|---|
| Reorder minimum | 200 units |
| Sample turnaround | 3–5 business days |
| Production lead time | 25–35 days under 100% final inspection |
| OEM/ODM lead time | 15–25 days |
| New mould | 45–60 days |
| Warranty | 12 months from the shipment date, with a written resolution plan within 48 hours |
| Quality standard | AQL 2.5 inspection, <0.1% defect rate |
| Payment | 30% deposit with the balance before shipment, and net-30 terms after your third completed order |
Every quote ships with the full compliance file: CE DoC, RoHS, FDA material safety, MSDS and the batch noise test record for the units you receive. Request a quote for A0183 →
What ships with every unit
A0183 is produced on the same line, to the same standard, as the rest of the range. Production runs through our manufacturing partner in Dongguan, Guangdong, China, founded 2014, with 20+ dedicated QC staff and 30–45 days of critical component safety stock held.
Certifications
- CE — LVD (2014/35/EU), EMC (2014/30/EU)
- RoHS — 10 substances incl. 4 phthalates (SGS / Bureau Veritas)
- FDA material safety — silicone per 21 CFR 177.2600
- IPX5 — tested per IEC 60529 (12.5 L/min, 1 m, 3 min)
- UKCA — prepared on request for the UK market
Noise, measured not asserted
≤60 dB at 30 cm — dual-motor models 55–60 dB, single-motor 45–55 dB
The test record travels with the shipment, so your importer and your quality team receive the measurement for the batch they are actually clearing — not a catalogue figure. See the noise engineering.
The rest of the range
Four other models share this control platform, this material and this build standard. All five can be mixed in one order to reach the 300-unit minimum.
