Wholesale · Private label · OEM · ODM
Slow Duo Swan
Gift and boutique programmes that need a wand which reads as an object rather than a device — the swan neck is a silhouette a buyer can merchandise on an open fixture, and the suction crown plus vibrating tail give two stimulation points from one motor. It is the only swan-form body here, so a buyer stocking novelty-led lines has one slot for it and no near-duplicate to cannibalise. At 124 g and 150 mm it is light enough to hold and short enough for a small carton, and IPX6 rather than IPX5 puts it in the stronger rinse-safe tier.
Model AB0198A · Swan-form suction wand, tail vibration, IPX6
MOQ 300 units · mixed SKUs
Swan wand
10 (3 speeds + 7 patterns)
IPX6 — jet-protected, rinse-safe, not submersible
Request a Quote for AB0198A Request a Sample
Full range comparison: all 25 models side by side →
AB0198A specifications
Every figure below is the figure we publish on the range page and in our quote — measured or confirmed at sampling, not estimated. A field still pending verification is marked as such rather than filled in.
| Type | Swan-form wand: suction crown opening and a vibrating tail |
|---|---|
| Functions | Suction at the crown plus tail vibration, curved for G-spot contact |
| Motors | 1 × independent |
| Vibration modes | 10 (3 speeds + 7 patterns) |
| Dimensions | 150 × 37 mm |
| Weight | 124 g |
| Battery | Rechargeable Li-ion, USB charging |
| Runtime | Approx. 60 minutes |
| Noise | <60 dB |
| Material | ABS + eco-grade silicone |
| Waterproof | IPX6 — jet-protected, rinse-safe, not submersible |
| App | Not required |
| Colours | Terracotta; custom colour available at volume |
| Certifications | CE (LVD + EMC + RoHS) · RoHS · IPX6 |
Where AB0198A fits
Gift and boutique programmes that need a wand which reads as an object rather than a device — the swan neck is a silhouette a buyer can merchandise on an open fixture, and the suction crown plus vibrating tail give two stimulation points from one motor. It is the only swan-form body here, so a buyer stocking novelty-led lines has one slot for it and no near-duplicate to cannibalise. At 124 g and 150 mm it is light enough to hold and short enough for a small carton, and IPX6 rather than IPX5 puts it in the stronger rinse-safe tier. Three things procurement asks about this model specifically:
What it does
A 150 mm wand with a suction opening at the crown and vibration in the tail, on the range-standard ten modes (3 speeds + 7 patterns). The point of the swan neck is that it puts the crown at the angle an insertable body needs, so a buyer does not have to specify geometry to get contact — that curve is the product, and the suction and the vibration land at two different points rather than competing at one.
Where it sits
It is the only swan-form body in the range, and the shape is the shelf argument as much as the function is. It is NOT AB0178 — that is the suction bird, a different product with a different mechanism — and it is not the AB0196 dual-action insertable, which drives two paddles off one motor rather than a suction crown and a vibrating tail. At 124 g it is among the lighter bodies here, which matters for a wand a customer holds rather than one left on a surface, and at 150 mm it sits between the 129.5 mm dual-action insertable and the 160 mm mini wand on length.
What to know before quoting
IPX6, so it is jet-protected and rinse-safe and still not immersion-rated — one of five IPX6 models here, and keep it out of the submersible list. It is ABS with eco-grade silicone, NOT the medical-grade silicone used on the five dual-zone bodies, so do not carry that claim across from the rest of the range. One motor: quote it as a single-body price point, not a dual-zone one. Note the model code — the factory sheet and this page both publish AB0198A, while some of the supplier photography is filed under AB0198B, so confirm which suffix the sample carries before printing it on a carton. The factory sheet lists the colourway as magenta with purple as a volume option rather than as stocked variants, so quote colour as a custom line. The sheet quotes 200 units; that is the reorder quantity, not a lower opening minimum — the range still opens at MOQ 300 mixed.
Commercial terms for AB0198A
These are the range terms and they apply to AB0198A without variation. We do not publish a per-model minimum, because the factory does not impose one — all 25 models can be mixed in a single order to reach the 300-unit minimum.
| Minimum order quantity | 300 units, mixed SKUs welcome |
|---|---|
| Reorder minimum | 200 units |
| Sample turnaround | 3–5 business days |
| Production lead time | 25–35 days under 100% final inspection |
| OEM/ODM lead time | 15–25 days |
| New mould | 45–60 days |
| Warranty | 12 months from the shipment date, with a written resolution plan within 48 hours |
| Quality standard | AQL 2.5 inspection, <0.1% defect rate |
| Payment | 30% deposit with the balance before shipment, and net-30 terms after your third completed order |
Every quote ships with the full compliance file: CE DoC, RoHS, FDA material safety, MSDS and the batch noise test record for the units you receive. Request a quote for AB0198A →
What ships with every unit
AB0198A is produced on the same line, to the same standard, as the rest of the range. Production runs through our manufacturing partner in Dongguan, Guangdong, China, founded 2014, with 20+ dedicated QC staff and 30–45 days of critical component safety stock held.
Certifications
- CE — LVD (2014/35/EU), EMC (2014/30/EU)
- RoHS — 10 substances incl. 4 phthalates (SGS / Bureau Veritas)
- FDA material safety — silicone per 21 CFR 177.2600
- IPX5 — tested per IEC 60529 (12.5 L/min, 1 m, 3 min)
- UKCA — prepared on request for the UK market
Noise, measured not asserted
≤60 dB at 30 cm — dual-motor models 55–60 dB, single-motor 45–55 dB, and the telescoping, wearable, suction and pen units each under 60 dB
The test record travels with the shipment, so your importer and your quality team receive the measurement for the batch they are actually clearing — not a catalogue figure. See the noise engineering.
The rest of the range
24 other models on the same control platform and the same build standard. All 25 can be mixed in one order to reach the 300-unit minimum.
